|
Instruction :-
1. Connect the power and trumpet as shown in the radio-speaker
connect sketch.
2. Connect the adapter “11” with power and radio, turn
the power switch “1” to “on” side: the radio
is on, and the glow light is on.
Press the reset key “3”, then press the scan key “4”,
the radio begins to search for stations. Select the program that
you like.
4. When the scan key “4”, has reached the end, press reset
key “3”: the radio will go to the reset state. Press scan
key “4” to select station.
5. Turn the volume circle “2” to suitable volume.
AUDIO USE:
1. Put one end of audio cord to the jack “6”, the other
end must connect machine audio output jack such as (CD, VCD, MP3,and so on). The radio will turn off automatically.
2. Turn the player on play mode, at this time this unit can be used
as a multi-media player.
3. Turn the volume circle “2” to suitable volume.
4. If you want to listen to a radio station, pull the audio cord
out of the jack.
POWER USE:
This unit can only be used with the supplied adapter. Please do
not try to use another adapter with this unit, or it will damage
the unit.
ATTENTION:
• Avoid any violent shock or dropping the unit.
• Do not keep unit in any place with direct sunlight, high temperature or moisture.
• Do not use any liquids with corrosive chemicals or hard cloth to clean the unit.
• Do not disassemble the unit.
|
